Hot Dipped Barrier-manufacture,factory,supplier from China

Product IntroductionsHot-dip galvanized metal plate is appropriate for fabrication with the aid of forming, urgent and bending due to the fact of its incredible forming property, portray ability, welding ability.

Product IntroductionsHighway guardrail is an important traffic safety facility, mainly used to separate motor vehicles, non-motor vehicles and pedestrians, improve road traffic safety, improve traffic order1.

Product IntroductionsGalvanized metal coil has many advantages, which make it extensively used in the development industry. In the manufacturing process, the floor of the galvanized metal coil is included with a layer of zinc, which makes its corrosion resistance significantly enhanced.

Product IntroductionsDX54D galvanized coil is a kind of steel products widely used in many fields, mainly produced by hot dip galvanizing process, with good corrosion resistance and processing properties. This galvanized coil is not only beautiful in appearance, but also provides long-term protection during use. The production of DX54D galvanized coil mainly adopts continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the melting zinc plating tank to make galvanized steel plate.

Product IntroductionsGalvanized metal coil is metal lined with a layer of zinc on the floor of the metal plate, which gives the galvanized metal coil mild weight, stunning look and true corrosion resistance. The galvanized layer can efficaciously forestall the metal plate from rusting, thereby extending its carrier life.

Product IntroductionsHighway guardrail is an important traffic safety facility, mainly used to separate motor vehicles, non-motor vehicles and pedestrians, to ensure the safety and order of road traffic.

Product IntroductionsHighway double-wave guardrail is an necessary site visitors security facility, which is in the main used to forestall out-of-control cars from speeding out of the avenue and make sure using safety.

Product IntroductionsRaw material preparation: The raw materials usually used are cold-rolled steel plates or hot-rolled steel plates, which need to undergo strict quality testing to ensure that they meet the production requirements.Steel strip pretreatment: The purpose is to remove oil, rust and other impurities on the surface of the steel strip to ensure the adhesion and quality of the galvanized layer.

Product IntroductionsColor corrugated panels are often used in conjunction with light steel components such as galvanized C-shaped steel to form light steel villas or industrial building systems. This kind of combination has the characteristics of efficient installation, recyclable and economical, especially suitable for environmental protection and energy saving buildings. Metal roofing systems can also enhance durability through materials such as titanium zinc sheets and stainless steel.

Product IntroductionsHigh-speed guardrail bolt is an important part of highway safety protection, its main function is to firmly connect the corrugated guardrail plate to the steel column, forming a strong protective barrier.

Product IntroductionsHighway guardrail is an vital site visitors security facility, in most cases used to separate motor vehicles, non-motor cars and pedestrians, to make sure the protection and order of avenue traffic.

Product IntroductionsThe thrie beam guardrail is a highly effective safety barrier designed for use on highways, expressways, and other high-traffic roadways. Known for its superior strength and durability, the Thrie Beam system features three corrugated beams, which provide enhanced energy absorption and vehicle containment during collisions.

Product IntroductionsAluminized zinc corrugated plate is a kind of metal material based on aluminized zinc steel plate. Its coating is composed of 55% aluminum, 43.4% zinc and 1.6% silicon, which has both the barrier protection function of aluminum and the sacrificial protection function of zinc. The material has a strong corrosion resistance, life of more than 20 years, and can still maintain stable performance at 315℃ high temperature environment.

Product IntroductionsGalvalume Steel Sheet is a kind of alloy coated steel plate which is obtained by aluminum-zinc alloy covering on the surface of steel plate. This steel plate is composed of 55% aluminum, 43.4% zinc and 1.6% silicon solidified at 600℃, forming a dense quaternary junction crystal structure, thus providing a strong and effective barrier against corrosion caused penetration. Its surface is unique smooth, flat and gorgeous star flowers, the primary color is silver white, widely used in many fields.

Product IntroductionsGalvanized steel coil is the steel coil treated by hot dip galvanizing process, and the surface is covered with a zinc layer, which has excellent corrosion resistance and weather resistance.

Product IntroductionsGalvanized strip steel coil is a narrow strip steel coil made of cold-rolled or hot-rolled steel sheet as the base material, after forming zinc layer on the surface by hot-dip galvanizing process, and then by strip processing. The production process mainly includes raw material preparation, steel strip pretreatment, hot dip galvanizing, cold rolling forming, strip cutting and other steps. Among them, strip processing is to cut wide galvanized steel coil into specific width strip products by cutting equipment to meet the needs of different application scenarios.

Product IntroductionsThe spacer is usually made of high-quality low carbon steel to ensure its good mechanical properties and durability. The manufacturing process includes hot-dip galvanizing and electrostatic spraying, etc., to improve the anti-corrosion performance and service life of the block. The participation of the spacer can distribute the collision force to more span structures, thereby increasing the overall strength of the guardrail and improving the safety of the road.

Product IntroductionsZinc-coated steel coil with large zinc-coated flowers is a coating plate with obvious zinc-coated flowers formed by free growth of zinc grains in the process of hot galvanizing. The formation of this large zinc flower is mainly due to the hot dip plating under the condition that the zinc liquid contains antimony or lead, so that the zinc grains grow freely during the normal solidification process. Zinc flower obtained by condensation of zinc layer under normal conditions.

Product IntroductionsHot-dip galvanized steel coil is suitable for fabrication by forming, pressing and bending because of its excellent forming property, painting ability, welding ability. Hot-dip galvanized steel coil is mainly used in construction, home appliances, automobiles, machinery, electronics, light industry and other industries. Hot dip galvanized steel Surface Treatment: Oiled,Passivated, passivation+oils, etc.Product ParamentersProduct nameSeel CoilGradeSGCC/SGCH/G550.G350Thickness0.10-3.0mmWidth30-1250mmZinc CoatingZ30-275gSrface TreatmentLight oil.

Product IntroductionsGalvanized strip metal coil is a slim strip metal coil made of cold-rolled or hot-rolled metal sheet as the base material, after forming zinc layer on the floor by means of hot-dip galvanizing process, and then through strip processing. The manufacturing procedure in most cases consists of uncooked cloth preparation, metal strip pretreatment, warm dip galvanizing, bloodless rolling forming, strip slicing and different steps.

Product IntroductionsCold-rolled galvanized coil is a cold-rolled steel product, the surface is bright, high finish, often used in metal products, precision electronics, machinery manufacturing and other fields. Its main uses includeThe production process of cold-rolled galvanized coil mainly includes the following steps:Hot rolled coil: The steel coil is first heated above the recrystallization temperature for rolling to form a hot rolled coil.Cold rolling process: At room temperature, the hot rolled coil is rolled below the recrystallization temperature to make cold rolled coil.

Product IntroductionsHot galvanized sheet is a kind of steel plate treated by hot dip galvanizing process, which can effectively prevent the surface of the steel plate from oxidation corrosion and prolong the service life. It has excellent corrosion resistance and mechanical properties. The production of hot galvanized sheet mainly includes smelting zinc ingot, pickling to remove oxidation and impurities, dipping into molten zinc solution for galvanizing treatment, and finally surface treatment and processing.

Product IntroductionsSGHC is a galvanized Steel coil, where SG stands for steel, GH stands for Hot-rolled, and C stands for Common. SGHC galvanized steel coils usually have good corrosion resistance. The main feature of SGHC galvanized steel coil is that it is hot rolled and then galvanized to enhance its corrosion resistance. Its surface may have some characteristics, such as "flowery" or "flowery", which refers to whether the surface has a distinct pattern of zinc flowers.

Product Introductions‌DX53D color coated steel coil is a kind of surface treated steel plate, with excellent corrosion resistance and long service life ‌. It is usually made of hot-galvanized sheet, hot-plated aluminum zinc sheet or electrogalvanized sheet as the substrate, after surface pretreatment (such as chemical degreasing and chemical conversion treatment), coated with one or more layers of organic coating, and by baking curing ‌.Material and characteristicsThe material of DX53D color coated steel coil is usually DX51D, DX52D, DX53D, etc.